FYBRO HP is a mono-component liquid product based on photoreticulating synthetic elastomers in aqueous dispersion. It is a fibrereinforced paste that can be easily applied on horizontal and vertical surfaces. It polymerizes to create a complete elastic impermeable membrane resistant to thermal shock, ultraviolet rays and acid rain. It adheres perfectly to all types of materials including bitumen coating, concrete, fibre cement, wood, metal surfaces, etc. FYBRO HP is used for waterproofing old and new treadable coverings (terraces, balconies, etc.); for waterproofing valley gutters and fibre cement coverings. It is also used for restoring old bitumen waterproofing.
MONOFLEX is a single-component formula composed of elastomeric polymers, bitumen emulsion, inorganic binders, quartz selected aggregates and special additives in water dispersion. Ready to use, no mixing is required. It comes as an easily workable creamy paste, applicable both horizontally and vertically, with high adhesion to all surfaces in concrete and masonry. After full drying, it forms a flexible and waterproof membrane with good transpirability, resistant to the action of agents such as CO2, SO2 and saline aggression of chlorides and sulphates.
ELASTAN-BIT is a ready to use semi-dense paste obtained by mixing fine bitumen, special synthetic resins and mineral fillers. The resulting bituminous paste is brown in colour, and during the drying phase it will take on a dark black colour, showing an excellent adhesiveness to support and high elasticity.
