POLYURETHANE GLUE is a special polyurethane-based, single-component, hydro-hardening adhesive. The medium-elastic bond achieved is highly adhesive and particularly strong. Its properties of adhesion and toughness make it ideal for gluing paste friezes and frames in wood, MDF, particle board, wood pulp and polyurethane together and on painted surfaces. Suitable for bonding frames and plasterboard panel together or on surfaces as described above. Excellent for gluing polystyrene sheets, laminates and wood surfaces for insulating and insulating panels (roofs of industrial halls etc.).
BIT ADHESIVE is a ready to use, thixotropic, bituminous adhesive paste with a low content of solvents ideal for the cold adhesion of insulating panels. The solvents and resins contained in BIT ADHESIVE makes the application on polystyrene and polyurethane panels possible without melting when using the cold applied technique. BIT ADHESIVE has been studied and formulated for the cold adhesion of every type of insulating panel and sound absorbent. It can be applied on horizontal and vertical surfaces thanks to its high thixotropy and can also be applied both onto humid or wet surfaces. BIT ADHESIVE is a excellent, cost effective alternative to warm bitumen.
PRATIKO MASTIC is a flexible bituminous mastic reinforced with synthetic fibers which, once dry, forms a plasticized layer with excellent adhesion. PRATIKO MASTIC has an excellent adhesion and durability on bituminous surfaces, galvanized sheets, smooth and corrugated metal sheets, concrete, fiber cement, etc. which remains constant in time. The product has excellent resistance to aging, U.V. ray and atmospheric aggression. PRATIKO MASTIC can also be applied at temperatures below 0°C, on slightly humid surfaces and is compatible with all types of bituminous membranes.
PRATIKO ADESIVO is a bituminous adhesive, reinforced with synthetic elastic fibers, which establishes the bonding layer between the application surface and the waterproofing membrane, assuring the roof a flexible and permanently durable layer. PRATIKO ADESIVO also prevents vapor transmission between the interior and exterior of the roof and therefore acts as a vapor shield. PRATIKO ADESIVO applied evenly and uniformly over the substrate fills in all the irregularities such as cracks and fissures which may be found on the surface. PRATIKO ADESIVO improves the waterproofing system by not modifying the characteristics of the membrane, something which instead may happen during the most commonly used torch application where an irregular use of flame can alter the same. The PRATKO ADESIVO provides a fully bonded surface to the substrate including on old bituminous membranes, also mineral finished, regenerating the old waterproofing layer by saturating and filling in any cracks, fissures or irregularities.
